The materials are to be supplied as wire rods, wires, and bars,
covering High Carbon Chromium Bearing Quality Steel.
The material meets all the provisions of ASTM A 295 unless otherwise modified herein
and required by the buyer.
The steels are made by the process of continuous casting killed steel or ingot casting
killed steel, Those are produced by the vacuum degassed throughout electric furnace
or convert and ladle furnace.
’Ίfor more,
* Chemical Composition(%)
SAE 521000, JIS G 4805 SUJ-2
  C Cr Si S P Mo Cu Ni
Minimum 0.98 1.30 0.20 - - - - -
Maximum 1.10 1.60 0.35 0.025 0.025 0.06 0.25 0.25
Total Oxygen Maximum 10ppm


* Non-metallic Inclusion rating
ASTM E 45, method A, the limit of table 2
  A B C D Total Oxygen Remarks
Thin 2.5 2.0 0.5 1.0 10 ppm  
Thick 1.5 1.0 0.5 1.0 maximum  


* Available Size & Dimension
  HD, SAFS, SAIP HRPP, SAPP CD Bar
Diameter (mm) 2.0 - 32.0 5.5 - 42.0 4.0-30.0
Tolerance (mm) +0, -0.002 (min) +/- 0.5 (max) h9
Dimension (I.D.)
Dimension (O.D)
610 - 1,100 mm 850 -1,100 mm (1,000-2,000kg )
650 - 1,600 mm 1,250-1,500 mm


* Surface Condition
  Wire/Wire rods: Phosphate(Bonderite with Ca) + Lime
  CD bar: Bright and Oiled
 
* Packing Method for Export
about200 kgs single coil, strapped by steel banding, wrapped by PP cloth,
  PP cloth after unitization into one bundle
about 1,000 or 2000 kgs single coil/bundle wrapped by PP cloth.
* Delivery & Shipment
Within 30-90 days from final agreement of contract
via conventional or container vessel
* Quality Assurance
  QS 9000
  ISO 9001, KSA 9001
  ISO 9002, KSA 9002

‘γ UP

Copyright 2003 hanresco. All rights Reserved. Tel 82-2-402-1885(rep.) Fax 82-2-409-1887/1885
for more information, please contact.
skwon@hanresco.com